Double Sided Machining Isn’t as Hard as You Think it is

Double sided machining is not as difficult to set up as you might think. Many people are intimidated by it, but in reality, you just need to create location holes in the top side of your work piece and mirrored holes in the wasteboard using some dowels as location pins. Once your piece is secured back down using new screw hole locations, your x and y zero locations stay the same and you’re ready to start cutting on the opposite side. It’s a pretty easy process!

Check out the tools used on our website –

Amana Tool 1/4″ Upcut bit 46102-K – https://toolstoday.com/v-13778-46102-k.html

RPM: 18,000
Feed Rate: 200ipm
Plunge Rate: 100ipm
Single Pass: Spiral Ramp Down

Amana Tool 3.6 deg 1/16″ radius Tapered Ballnose bit, item no. 46286-K – https://toolstoday.com/v-13916-46286-k.html

RPM: 18,000
Feed Rate: 150ipm
Plunge Rate: 150ipm
Stepover: 7%

i2R A.24 2’x4′ CNC machine – https://toolstoday.com/i2r-cnc-a-series-cnc-machine-3hp-spindle.html

Vectric V-Carve Pro Design Software – https://toolstoday.com/vcarve-pro-10-0-software-for-cnc-1.html

Fein ASCM 18 QSW AS 18v Drill/Driver – https://toolstoday.com/fein-71161461090-4-speed-cordless-drill-driver-bare-tool/

Fein QuickIn Drill Chuck – https://toolstoday.com/fein-63208002010-quickin-drill-chuck.html

Fisch Brad Point Drill Bit – https://toolstoday.com/fisch-fsf-328094-brad-point-drill-8-pcs-set-incl-3-10mm-dia-in-case.html

Fein QuickIn Hex Bit Holder – https://toolstoday.com/fein-60510222010-quickin-hexagonal-bit-holder-1-4-inch.html

Wera 3/8″ Zyklop Rachet Set Imperial – https://toolstoday.com/wera-05003596001-8100-sb-4-zyklop-speed-ratchet-set-3-8-inch-drive-imperial-38-pieces.html

#short #shorts

** Subscribe – https://www.youtube.com/user/toolstoday

** Shop the website – http://www.toolstoday.com

source