One tool for SUS304 machining #shorts #cnc #machine #engineering #tools
© 2026 Tungaloy Corporation
🔧 One tool for multiple operations on SUS304.
The machining is shown dry so the cutting action is easy to see. For drilling, the X coordinate is programmed with the tool diameter in mind, so the center of the tool diameter is aligned with the spindle center.
The measured cutting-edge position is used as-is, making setup feel similar to a standard boring bar. A finished workpiece is also shown at the end. ✨
*Finishing pass shown with wet machining.
■Product：TungBoreMini
■Product Information
Tool : TBM08RF12-2.25
https://catalog.tungaloy.com/Item.aspx?cat=7754205&fnum=2255&mapp=BO&GFSTYP=M&srch=1
Insert : XCMT040102R-PS AH725
https://catalog.tungaloy.com/Item.aspx?cat=7754206&fnum=2832&mapp=BO&GFSTYP=M&srch=1
■Cutting Condition
External turning and facing / DRY
Vc = 80 m/min
f = 0.07 mm/rev
ap = 0.5 mm
Drilling / DRY・WET
Vc = 60 / 80 m/min
f = 0.02 / 0.02 mm/rev
ap = 1.5 / 10 mm
■Material : SUS304 / X5CrNi18-10 / 304
■Machine : CNC Lathe / OKUMA LB3000EXII 22/15kW, 5,000min-1, Chuck 8inch, Stroke X260 Z565
For more information, please contact us!
#shorts
#cnc
#machine
#engineering
#tools
source
