Making a Wooden Maze Game on the CNC

Making a wooden maze game on the Stepcraft M.1000 CNC. This project uses several different bits for the engraving, V-carving, acrylic and wood cutting before the clear acrylic top and finished pieces are assembled into the final maze.

The downloadable plans include the project files and toolpaths so you can make one on your own CNC. Check out the plans and tools used on our website –

Maze Game CNC Plans, item no. MAZ_GAME – https://toolstoday.com/maze-game-cnc-plans.html
Stepcraft M.1000 CNC Machine, item no. stepcraft_M1000 – https://toolstoday.com/stepcraft-m-1000-cnc-system.html
Amana Tool 30° Spektra Engraving Bit, item no. 45771-K – https://toolstoday.com/v-14233-45771-k.html
Amana Tool 90° Insert Carbide V-Groove Bit, item no. RC-45711 – https://toolstoday.com/v-10600-rc-45711.html
Amana Tool 1/16″ Spektra O-Flute Plastic Cutting Bit, item no. 51441-K – https://toolstoday.com/v-16104-51441-k.html
Amana Tool 1/4″ Spektra O-Flute Plastic Cutting Bit, item no. 51404-K – https://toolstoday.com/v-13351-51404-k.html
Amana Tool 1/4″ Spektra Downcut Bit, item no. 46202-K – https://toolstoday.com/v-13779-46202-k-bit.html
Amana Tool 1/16″ Spektra Downcut Bit, item no. 46233-K – https://toolstoday.com/v-14497-46233-k.html
Amana Tool 1/4″ Radius Roundover Bit, item no. 49504 – https://toolstoday.com/v-5854-49504.html

CNC Settings
45771-K
RPM: 18,000
Feed Rate: 50ipm
Plunge Rate: 25ipm

RC-45711
RPM: 18,000
Feed Rate: 40ipm
Plunge Rate: 20ipm

51441-K
RPM: 18,000
Feed Rate: 35ipm
Plunge Rate: 17.5ipm
Spiral Ramp Down: 0.125″

51404-K
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 50ipm
Spiral Ramp Down: 0.125″

46202-K
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 50ipm
Spiral Ramp Down: 0.250″

46233-K
RPM: 18,000
Feed Rate: 35ipm
Plunge Rate: 17.5ipm
Spiral Ramp Down: 0.125″
#short #shorts

source